Jungheinrich коды ошибок расшифровка

See also: Jungheinrich Service Repair Manuals PDF

Travel setpoint device: travel potentiometer, accelerator pedal Steering actual value transmitter: steer potentiometer, proximity switch (on steered wheel)

ONLY in 1st generation! All messages numbered above 100 come from the interface and correspond to messages 1- xx -99!

Jungheinrich коды ошибок расшифровка

Jungheinrich System Error Codes list.pdf

Adobe Acrobat Document

Jungheinrich Fault Codes.pdf

Jungheinrich Error Codes List PDF.pdf

Jungheinrich EJC112 & E1202 Event Messag

Z This display units shows a four-digit event message for every

event. Trucks that only use one luminous display (e.g. LED) show

the event through a flashing code (see «Display System”).

Each event message is also stored in the master logbook. The

master logbook describes the event in more detail through the sub

index behind the event message ().

Event numbering display

Function group; Event group

Event number S Sub index

The first two characters “, ” refer to the category. The middle

two digits “” refer to the event. From these two digits the range:

• 1 to 50 describes standard events (uniform basic events)

which can occur in any function group.

• 51 to 99 describes specific events.

The event is described in further detail through the last characters

“S” (single digit / multi-digit).

This process ensures that a unique number is assigned to each

0 Fault reset or

1 General fault / additional functions

Logic error, e.g. both directions selected simultaneously

(input interface, device-internal, output interface)

Example: Output transformer short circuit, EEPROM not

(internal software, application software, data record /

Example: EEPROM data error

7 Additional modules

8 CAN monitoring

9 External fault

German-made Jungheinrich loading equipment is distinguished by excellent durability and performance. Benefit from consistently high handling speeds with maximum comfort. This European-quality equipment perfectly adapts to various operating conditions, meets strict safety standards, is distinguished by high working and driving qualities for moving and storing goods for work both in an open area and inside a closed warehouse or a freight railway container.

Jungheinrich LPG trucks, like trucks from other brands of this type, have a number of advantages. This is a universal warehouse equipment, which is very economical if, when buying it, you correctly calculate the basic requirements for the height of lifting of loads, carrying capacity, speed of movement, weight of the machine, its dimensions and, of course, the types of cargo with which the machine has to deal. If the calculation is carried out carefully, and the optimal model is chosen, the costs for it, given the low price of gas, will pay off in a few months. And due to its high ecological class, it can work on a shift all day long with practically different cargoes that require specific transportation conditions. The peculiarity of gas forklifts is that you can start them in any weather without any problems, which can not be said about diesel or gasoline ones.

Читайте также:  Код ошибки 4 в книге продаж пояснения 20 21

Jungheinrich electric forklift EFG 115

The distribution of weight to the front axle is 3805/1270.

Carrying capacity — 1500 kg.

Total weight 2870 kg.

running — 4 kW;

lifting — 6 kW.

The maximum speed is 12.5 km / h.

Clearance — 100 mm.

The wheelbase is 1200 mm.

The center of gravity of the load on the forks is 500 mm.

Mast tilt (a / b) in degrees — 5/6.

Mast — 2000-3550 mm.

Working corridor width:

across — 3114 mm;

along — 3236 mm.

The total width is 990 mm.

The total length is 2935 mm.

The service brake is hydraulic.

The maximum lifting height is 3000 mm.

The maximum climb is 16 degrees.

Fork dimensions (LxWxH) — 1150x100x35 mm.

Lifting speed with / without load — 240/500 mm / s.

Lowering speed with / without load — 580/600 mm / s.

It is worth noting that it is quite difficult to find a new Jungheinrich EFG 115 loader in the domestic market. However, these forklifts are quite widely used, and here the price depends on the condition of the machine. In general, the cost can vary from 3,000 to 10,000 euros. The new EFG 115 will cost about 18,500 euros.

Electric forklift Jungheinrich EFG 215

The second series of EFG loaders differs from the first in a large set of technical options. All this could not but affect the cost, which will be slightly higher than the 115 model. However, first, let’s look at the technical specifications:

The distribution of weight to the front axle is 3870/1310.

Total weight 2978 kg.

running — 4.6 kW;

lifting — 11.5 kW.

Storage battery (voltage V / capacity kW * h) — 48/500.

The maximum speed is 16 km / h.

The wheelbase is 1249 mm.

Mast tilt (a / b) in degrees — 7/7.

Mast — 2000-3560 mm.

across — 3104 mm;

Along — 3226 mm.

The total width is 1060 mm.

The total length is 2924 mm.

Читайте также:  Код ошибки 0x0 windows 10

The service brake is electromechanical.

The maximum climb is 35 degrees.

Turning radius — 1440 mm.

Lifting speed with / without load — 460/600 mm / s.

Lowering speed with / without load — 550/550 mm / s.

As you can see from the technical characteristics, this car has almost the same dimensions as the previous model, but with more powerful motors and improved other indicators.

Jungheinrich коды ошибок расшифровка

For all other warning messages switch the truck off and on again. If the warning message appears again call the service department.

Jungheinrich коды ошибок расшифровка

Jungheinrich коды ошибок расшифровка

Jungheinrich коды ошибок расшифровка

Jungheinrich коды ошибок расшифровка

Jungheinrich коды ошибок расшифровка

Jungheinrich коды ошибок расшифровка

Jungheinrich коды ошибок расшифровка

Jungheinrich Service Manual

Jungheinrich DFG/TFG 660-690 Operating Instructions

Models: DFG 670; DFG 680; DFG 690; DFG S80; DFG S90; TFG 660; TFG 670; TFG 680; TFG 690; TFG S80; TFG S90; DFG S90.

Jungheinrich DFG S80 Service Manual

Models: TFG 680; DFG 670; DFG 660; DFG 680;  DFG 690; DFG S80; DFG S90; TFG 660; TFG 670; TFG 690;  TFG S80; TFG S90.

Jungheinrich DFG TFG 316-435 Operating Instructions

Models: TFG 430; DFG 320; DFG 425; DFG 430; DFG 435; TFG 316; TFG 320; TFG 425; TFG 435.

Jungheinrich EFG-Vac 22-30/ 25L/S/SL Service Manual Download

Jungheinrich ECE 225 (90309857) Spare Parts Catalogue Download

Jungheinrich EJC 110/112 Operating instructions Download

Jungheinrich DFG/TFG 16 — 50 A/B/C-K Operating instructions Download

Jungheinrich DFG 660 Service Manual

Jungheinrich DFG 670 Service Manual

Jungheinrich DFG_TFG 316-435 Operating Instructions

Jungheinrich ECE 225 Spare Parts Catalogue

Jungheinrich EFG 213-320 Operating Manual Download

Jungheinrich EFG-Vac 22 Service Manual

Jungheinrich EFG-Vac 25L Service Manual

Jungheinrich EFG-Vac 30 Service Manual

Jungheinrich EJD 220 Service Manual

Jungheinrich ERE 120 Service Manual

Jungheinrich ETM 214 Service Manual

Jungheinrich ETM 216 Service Manual

Jungheinrich ETM 325 Service Manual

Jungheinrich ETV 214 Service Manual

Jungheinrich ETV 216 Service Manual

Jungheinrich ETV 318Service Manual

Jungheinrich ETV 320 Service Manual

Jungheinrich ETV 325 Service Manual

Jungheinrich EZS 330 XL Operating Instructions Manual

Jungheinrich EZS 350 XL Operating Instructions Manual

Jungheinrich SLH 200 Service Manual

Jungheinrich TFG 660 Service Manual

Jungheinrich Fault Codes Download

Jungheinrich EJC112 & E1202 Event Messages Codes List


Jungheinrich System Error Codes list Download

The manufacturer of forklifts is Jungheinrich, which is a leader in the production and sale of industrial, warehouse and material handling equipment. The company began its journey from 1953, when
a small loader company was founded, and by 2011 the company had several factories at its disposal.

Читайте также:  Ошибка пин кода в банкомате

Forklifts are mainly used to work in warehouses, but without them they are very rarely managed in large-scale industries. They carry loads that are placed on pallets. Due to the version with a closed cabin, they are able to work even in places with unfavorable external environment, namely, with wind, dust, sparks, sawdust, steam, and so on.

Electric loaders are represented by 5 series, which differ in load capacity, low unloading height, technology, maneuverability, as well as convenience of the operator’s workplace.

1 series EFG 110/113/115. The letters mean that this is an electric forklift, the first number indicates the series, and the second two are the maximum carrying
capacity in hundreds of kilograms. These are lightweight and compact loaders that have just one rear wheel. Thanks to these parameters, they have excellent maneuverability and can move even
inside the truck body. However, these «kids» are able to work with a weight of from 1 to 1.5 tons and lift the load to a height of 6.5 meters. AC control electronics may be updated.

EFG 213/215 / 216k / 216 / 218k / 218/220. The index k near some models indicates that the model has a smaller battery, a shorter base and a shorter fork body. This series has
the same dimensions and related benefits. However, the maximum load capacity is increased, as well as equipped with a large number of technologies. In the loader, an electric power steering was
added, the ability to independently configure 5 work programs, replace batteries, a more thoughtful security system, an automatic parking brake, smart electronics, and a maintenance-free brake
system and electric motor. The case in these loaders is integral, which provides greater stability when maneuvering.

EFG 316 / 316k / 318 / 318k / 320. The main differences between these trucks from previous models is that they have 4 wheels and a fully enclosed cab with front and rear window
cleaner. The control system is now electro-hydraulic, which provides better handling. Cab stances were enhanced, and the lighting system and battery compartment received additional protection.

EFG 540k / 540 / 545k / 545/550 / S40 / S30. These are the most powerful and big electric lift trucks. The maximum unloading height has also been increased, but only to 7.18
meters. You can use various packages of additional functions that determine the operation of the loader. In this series, more attention is paid to operator safety, as well as comfort and
ergonomics of the workplace.

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *