Hello, dear forklift friends!on FM X 17(1903) strange breakdown. I can’t fix it for 3 months already. alternately after rebooting, an error A6610 or A6612 occurs (fatal error of the converter D or F) the reachtruck was flashed. if you remove the RCU and U6 modules to another reach, then the error does not go over and these units work well. I checked the contactor, shunt and power buttons (changed everything) and the error may disappear for a couple of days and then come back again.
what else can be done. maybe someone faced such a problem?
Showing items 1 – 2 of 2 results.
Sort messages by:
Helo, dear Seyit Akcan!thanks for you replyI have a computer with a diagnostic program. I saw in the error description that you need to look at the decryptions of other errors, but they are not in memory, only 6610 and 6612. I flashed this unit to version 45, but it did not help and the errors remained. The battery was set fully charged and changed all the elements of the power unit. everything is very strange.
Fault code written in fmx 17 1901 series converter error.but it does not malfunction in two converters.
Do you have a connection computer?
It is necessary to see other malfunctions on the computer.
Have you checked the battery.
It is necessary to flash it with the computer.
Equipment options
Sharpening all senses: we can support you with our wide range of smart driver assistance systems and functions which will make your day-to-day work significantly easier. You will be able to drive in a safer, more comfortable, efficient and fatigue-free manner – in every driving situation.
STILL SafetyLight 4plus
The visual warning system for fewer accidents
The blue warning light, STILL SafetyLight 4plus, significantly increases work safety in areas which are confusing or full of bends. The blue light spots are projected approx. 5 m in front of and behind the truck and warn people about the approaching truck to prevent impending collisions.
Acoustic signal when reversing
Safety in the warehouse is increased thanks to an acoustic signal during reversing. Colleagues are therefore able to notice the forklift truck even if they have their back to it.
Broadband alarm
The broadband alarm is an audible alarm that emits a broadband signal tone. Over longer distances, the tone is drowned out by ambient noise. However, in the immediate environment the noise and thus the source of danger are very easy to locate. This increases awareness of the truck and prevents accidents.
Protective grille roof
The protective grille roof is available in a low or high version, according to the height of the passageways. It protects the driver from falling loads.
Load backrest
Keeping the goods in place: the load backrest stabilises the transported goods at the fork carriage back so that they can be securely transported from A to B.
Shock detection (with or without FleetManager 4
Where shock detection is used without FleetManager, an accelerometer detects mechanical shock events indicative of improper use. Once shocks have been detected, the truck is set to creep speed. The supervisor can turn the speed restriction back off again by entering the ‘Fleet manager PIN’ in the Easy Control Display.
As well as shocks, these notifications can also include information about the speed of travel, the time, the truck and the driver.
Rotating light
A flashing, warning or rotating light increases safety at the warehouse and makes other employees working in the warehouse aware of the forklift truck via a flashing yellow light signal. If preferred, this can be set to only light up when reversing. The use of this light increases safety particularly in areas where hearing protection is required to be worn. The rotating light is available in various designs and can be mounted on or behind the overhead guard.
Access control perfectly integrated into the truck with different types of access authorisation for one or more trucks: with FleetManager 4.x you are free to choose the type of access authorisation for one or more trucks: chip, FleetManager card, your personal plant ID card or a PIN.
Thanks to the smart auto-logout function, the trucks are automatically deactivated after a freely selectable period of time – this also increases safety.
If desired, you can limit the usage of your forklift truck to specific persons or groups of persons via access authorisation. Select whether the release of the truck should be carried out using a key switch or via a digicode system with ten configurable access codes (or PINs).
Tilt seat
Sit back and relax:
The optional tilt seat for the FM-X noticeably increases the ergonomics of the driver’s work space. The tilt seat is easy to operate and protects the driver’s back and neck while working. It also improves visibility when climbing in and out.
Panoramic glass roof
Optimal visibility at all times: the optional panoramic overhead guard with armoured glass window provides improved visibility when storing and retrieving goods. It works entirely without the need for struts and of course meets all the safety standards of a standard overhead guard.
Seat and foot plate adjustment
Always at the right height:
The height of the seat and the foot plate can be proportionately adjusted. Individual comfort settings can therefore be configured for different operators to ensure fatigue-free driving. The shock absorption in the driver’s work space protects back muscles on uneven floors and at thresholds.
Active Load Stabilisation (ALS)
No wobble here
The FM-X is always more than just a fork ahead of the rest. Thanks to Active Load Stabilising (ALS) you can be dealing with the next goods transport while others have to wait for the mask to stop vibrating. An automatic equalising pulse provides a fast and effective way of stopping the vibrations from occurring at great heights, reducing the waiting time at the shelf by up to 80%. The result is a significant increase in turnaround speed.
Curve Speed Control
Automatic speed adjustment for curves
The speed limiter controlled by steering angle reduces possible damage to goods by adapting to an appropriate cornering speed. This assistance function is available for various forklift trucks and warehouse technology devices, and regulates the driving speed automatically according to the steering angle. In other words, the driver doesn’t need to worry about speed when cornering. The truck automatically decelerates precisely as much as necessary for the operator to drive as safely but as quickly as possible.
Easy Target Plus
Hit the bullseye at the touch of a button
Thanks to Easy Target Plus, the goods can quickly and precisely be positioned in the desired shelf level – easily at the touch of a button without manual height corrections.
Advantages to you:
- High degree of safety for the driver and the goods
- Guided operation via the display assistant – simple operation even for inexperienced drivers
- Rapid selection of the desired shelf level
- Individual adjustment to all warehouse conditions
Lift height display
Seeing instead of estimating
With the help of the LED lift height sensor installed as standard, the lift height display ensures maximum precision from the first millimeter. This means that operators always know the height of the fork tips and can navigate precisely to avoid touching the rack when picking up the pallet. The system works with a repeatability of less than +/- 5 mm and the lift height is permanently shown to the drivers on the display.
Ceiling sensor
The ceiling sensor detects low ceiling heights and prompts the driver to reduce their speed in order to promote general work safety in the warehouse. It comprises an ultrasonic sensor on the roof of the truck, which detects ceilings up to a height of 20 m. Depending on the sensor signal, the maximum speed is controlled, whereby the standard speed is 6 km/h.
Driver profile via FleetManager
Who can use which forklift truck for which area of application? How fast may a certain driver travel in the industrial truck?
The solution: our smart driver profiles in FleetManager 4.x. This web-based application allows the features of the truck to be adapted to the operator’s requirements, such as a reduction in travel, lifting or tilting speed or automatic activation of the lights.
Driving programmes
The right driving programme for all requirements: the operator can choose between three established and two freely configurable driving programmes in the three operating modes: Blue-Q, normal and sprint mode. The driving programmes can be chosen according to the situation in order to achieve the maximum performance or energy efficiency.
Intelligent autopilot: the forklift’s Blue-Q (blue button) efficiency mode is activated at the touch of a button. An intelligent optimisation characteristic in the drive saves energy precisely where it is not impacted by the work process.
Up to 10% savings in energy consumption depending on the use profile and forklift equipment.
Lift height pre-selection
In addition to the lift height display, there is a range of lift height pre-selection systems available for the STILL FM-X reach truck. Manual lift height selection is available as standard. The Easy Target and Easy Target Plus systems are available as options.
Easy Target enables fast and precise positioning of the forks at the desired shelf levels, without the need for manual height corrections. This increases safety for both the driver and the goods. Up to eight areas, each with 20 levels, can be programmed. From 150 kg, the forklift truck is able to independently determine whether the operator wishes to store or retrieve loads and thus consider the pallet free lift accordingly. Another option available is Easy Target Plus, which also ensures that the fork tilt is in the neutral position. How you benefit: Individual customisation to suit all warehouse conditions, high degree of safety for the driver and the goods, and guided operation via the display assistant – also, for less experienced drivers, the shelf level can be selected in a matter of seconds.
Centring of the fork and mast tilt
Let nothing slide, even at great heights: the pallet is moved to a 90° position at the touch of a button. This makes extending and retracting the forks from the pallet a breeze even at the top shelf levels.
OptiSpeed 3. 0, 3. 1, 3. 3 for VNA trucks
Maximum handling capacity: STILL OptiSpeed
The package comprises comprehensive hardware and software assistance systems which optimise the movements of the truck regardless of the load. This significantly increases handling capacity. OptiSpeed uses software to determine optimum fork and travel movements depending on the lifting height. The system offers continuous adjustment of the driving speed in the aisle, independent of the lifting height. This ensures added volume capacity, comfort and safety.
The OptiSpeed 3.3 variant combines the advantages of previous variants with a weight sensor: in addition to the visual and acoustic signals when specific limit values are reached, a travel and lift stop is triggered when the permissible load weight is exceeded. The system calculates ideal transport movements and optimises them based on the lifting height and load. That enables higher speeds on empty runs or when loading and picking.
OptiSpeed for reach truck
Process safety at every lift height
The OptiSpeed driver assistance system reduces mast vibrations to a minimum for medium lifting heights and enables quick goods handling.
OptiSpeed cannot be combined with the ‘Active Load Stabilisation’ driver assistance system.
Creep speed for defined lift height
The forklift truck travels at creep speed (5 km/h) with a defined lift height. This significantly reduces the risk of an accident as the driver has sufficient time to react promptly in the event of a hazardous situation.
Shift and lowering lock
Leave nothing hanging on the balance: the system integrated in the FM-X reach truck virtually eliminates the risk of damaging goods when lifting pallets. The advantage of the shift and lowering lock is that pallets that have been lifted crookedly or diagonally lie on the wheel arms when they are lowered, and will therefore be tilted or pushed when pulling in the fork. The operator must always approve this for safety and is advised to check that the goods have been picked up correctly.
Fork wear protection (Silent Mast)
Autostop before ground contact:
When forks hit the ground, it’s not pleasant for the ears, the floor or the forklift. But on the other hand, would it not be very pleasant if this would not happen in the first place? That’s exactly why we developed the electric fork wear protection for you. When the assistance system is activated, it ensures that the forks cannot touch the ground during lowering. Shortly before that, they stop automatically – exactly so that you can thread them perfectly into the pallet. Forks dragging on the ground due to accidental startup in the lowered state are also a thing of the past.
Automatic parking brake
The automatic parking brake is applied automatically or at the push of a button, and prevents the truck from rolling. The electrohydraulic spring-loaded brake locks whenever the truck stops.
Fork camera system
The fork camera prevents damage to goods, personal injury due to falling loads, and collisions with the shelving. The system is mounted on the inner side of the fork tips and improves the visibility of the load, particularly at large lift heights, as the camera view is displayed on the driver’s monitor.
Lowered driving speed with lifted forks
Forks up, speed down:
More safety, less product breakage and ensuring proper vehicle use – these are the benefits offered by the Speed Reduction assistance system when the fork carriage is raised. As soon as the forks reach a height of 500 mm (or another defined threshold), the speed of the vehicle is automatically reduced. Even if a driver forgets that he should not drive with the load raised, the assistance system slows him down, guaranteeing safe handling of the load and vehicle.
<p>Mast transition damping, – end stop damping</p>
Lifting heavy? Glide gently!
Gentle and jerk-free lifting and lowering processes become a reality with the mast transition damping and end stop damping. The assistance system automatically adjusts the lifting and lowering speed before the mast transitions. As a result, the inner masts glide smoothly out of the outer mast and back again, protecting the load from jerking. Also, before reaching the lifting stops, the system automatically adjusts the speed so that the end position is also reached smoothly and without jerk.
Camera systems
Everything in view, all the time: the FM-X can optionally be equipped with a camera system which significantly facilitates operation and improves visibility.
Camera systems for fork carriage, outer mast and rear
The camera systems for fork carriage, outer mast and rear offer improved visibility and thus help to prevent collisions with the warehouse infrastructure, as well as personal injury. The camera, which is attached to the truck according to its position, improves the driver’s vision of the environment by displaying an image on the driver’s monitor of everything that is captured by the camera in front and behind the truck.
Panoramic mirror
The panoramic mirror, which can be mounted on the left or right side of the truck, improves visibility and reduces the size of the blind spot by expanding the field of vision. Drivers are able to get a quick overview of what’s behind them, allowing them to work more safely.
Daytime driving light
Safe operation at all times: the LED daytime driving light ensures that the forklift truck is always clearly visible even in darker areas. A daytime driving light is available for various trucks.